|
Up
| |
Melbourne Branch's NATA Accreditations:
EMC Technologies Pty. Ltd. is accredited by the National
Association of Testing Authorities (NATA). Australia. NATA
has mutual recognition agreements (MRA) with over 30 similar accreditation
bodies around the world including NVLAP, A2LA, UKAS, DaTech. The MRA facilitates acceptance and recognition of NATA endorsed reports in most countries.
Table of Contents:
A NATA endorsed reports means that you only need test once and your product can be sold in global markets.
EMC Technologies Pty Ltd is NATA accredited for a wide range of EMC, EMR, SAR and Safety standards.
EMC Technologies Melbourne Branch Testing accreditations include;
Emissions |
| AS/NZS 3548 (obsolete) replaced with AS/NZS CISPR22, EN55022 ITE |
| AS/NZS 2064 (obsolete) replaced with
AS/NZS CISPR11, EN55011 ISM |
| AS/NZS 2557 (obsolete) replaced with AS/NZS CISPR 12. EN55012 |
| AS/NZS1044 (obsolete) replaced with
AS/NZS CISPR14.1, EN55014-1 Appliances |
| AS/NZS1053 (obsolete) replaced with AS/NZS CISPR13 |
| AS/NZS 4051 (obsolete) replaced with AS/NZS CISPR 15 |
| AS/NZS 4251.1 and EN 55081.1 Generic (obsolete) both repalced
with EN61000-6-3 |
| FCC Part 15 requirements and ANSI C63.4 for unintentional and intentional emitters
in the frequency range 9 kHz to 18 GHz excluding TV receivers (15.117
and 15.119), TV interface devices (15.115), cable ready consumer electronic equipment (15.118), cable locating equipment (15.213),
unlicensed national information infrasture devices (Sub part E),
unlicensed PCS devices (Sub part D) and ultra wideband operation (Sub part F) |
| FCC Part 18 requirements and ANSI C63.4 for intentional emitters up to 18 GHz |
| Measurement of conducted emissions on electrical equipment for compliance with the
requirements of MIL-STD-461 in accordance with the following MIL-STD-462 methods:CE01, CE101, CE03, CE102 |
| Measurement of radiated emissions from electrical equipment for compliance with the
requirements of MIL-STD-461 in accordance with the following MIL-STD-462 methods:
RE01, RE101, RE102 (from 10 kHz to 1 GHz) RE02 (from 14 kHz to 1 GHz) |
| AS/NZS4251.1, EN50081-1, EN61000-6-2 Generic |
top of page
Immunity |
| IEC 61000-4-2, EN 61000-4-2 Electrostatic Discharge (ESD) [IEC
801-2] |
| AS/NZS 61000-4-3, IEC 61000-4-3, EN 61000-4-3 Radiated RF interference
[IEC 801-3] |
| IEC 61000-4-4, EN 61000-4-4 Electrical Fast Transient Bursts (EFT/B)
[IEC 801-4] |
| AS/NZS 61000-4-5, IEC 61000-4-5, EN 61000-4-5 Surges |
| AS/NZS 61000-4-6, IEC 1000-4-6, EN 61000-4-6 RF conducted disturbances |
| IEC 61000-4-8, EN 61000-4-8 Mains frequency magnetic fields |
| IEC 61000-4-11, EN 61000-4-11 Voltage dips, short interruptions and voltage variations |
| Immunity tests in accordance with NSC publication for Pattern Approval and Initial
Verification of Electricity Meters and Associated Transformers - 1999 |
| Performance of conducted susceptibility tests on electrical equipment for compliance with the
requirements of MIL-STD-461 in accordance with the following MIL-STD-462 methods: CS01, CS101, CS02 (except broadband susceptibility to Notice 3), CS06, CS114
(curves 1 to 4 only), CS115 |
| Performance of radiated susceptibility tests on electrical equipment for compliance
with the requirements of MIL-STD-461 in accordance with the following MIL-STD-462 methods:
RS01, RS02, RS03, RS101 and RS103 (up to 20 V/m from 1 to 18 GHz and 20 to 50 V/m from 10 kHz to 1 GHz) |
top of page
RF
and microwave radiation hazard measurement |
| Measurement of electromagnetic fields in accordance with AS 2772.2
and EMC Technologies TP2772 Revision 2.x for compliance with APRANSA
Radiation Protection Standard (RPS No.3) and AS/NZS 2772.1 (Int):1998;
Broadband measurements of E-fields in the range 100 kHz to 45.5 GHz
Broadband measurements of H-fields in the range 100 kHz to 1 GHz
Narrowband measurements of E-fields in the range 9 kHz to 18 GHz with
least uncertainties of measurement of - 3 dB |
| |
| SAR Measurement |
| ACA - Electromagnetic Radiation Human Exposure Standard: 2003 |
| FCC - Guidelines for Human Exposure to RF Electromagnetic Field: 1997 |
| CENELEC - ES 59005: 1998 |
| EN 50360: 2001 |
| EN 50361: 2001 |
| IEEE 1528: 2003 |
top of page
RF
Shielding Effectiveness |
| Attenuation performance tests on shielded enclosures in accordance
with MIL-STD-285 Rev 1.1 |
top of page
Refer to the NATA
website for the full scope of EMC Technologies accreditations.
top of page
|
