Sydney Branch's NATA Accreditations:


EMC Technologies Pty. Ltd. is accredited by the National Association of Testing Authorities (NATA). Australia.   NATA has mutual recognition agreements (MRA) with over 30 similar accreditation bodies around the world including NVLAP, A2LA, UKAS, DaTech.   The MRA facilitates acceptance and recognition of NATA endorsed reports in most countries.   

 

Table of Contents:

 

 

A NATA endorsed reports means that you only need test once and your product can be sold in global markets.

NATA logo NATA Accredited Laboratory Number: 5292

EMC Technologies Pty Ltd is NATA accredited for  a wide range of EMC, EMR, SAR and Safety standards.  

EMC Technologies Sydney Branch  Testing accreditations include;

Emissions

AS/NZS 2064, AS/NZS CISPR 11, CISPR 11 and EN 55011
AS/NZS CISPR 12 and CISPR 12, (excluding motor boats and similar water vehicles)
AS/NZS CISPR 13, CISPR 13 and EN 55013
AS/NZS CISPR 14-1, CISPR 14-1 and EN 55014-1
AS/NZS CISPR 15, EN CISPR 15 and CISPR 15
AS/NZS 4251.1 and EN 61000-6-3 (excluding measurements below 2 kHz & dc ports)
Emission tests on electromedical equipment to AS/NZS 3200.1.2, IEC 60601-1-2 and EN 60601-1-2
FCC Part 15 requirements and ANSI C63.4 for unintentional and intentional emitters
in the frequency range 9 kHz to 18 GHz excluding TV receivers (15.117 and 15.119),
TV interface devices (15.115), cable ready consumer electronic equipment (15.118), 
cable locating equipment (15.213), unlicensed national information infrasture devices (Sub part E), 
unlicensed PCS devices (Sub part D) and ultra wideband operation (Sub part F)
FCC Part 18 requirements and ANSI C63.4 for intentional emitters up to 18 GHz
Measurement of conducted emissions on electrical equipment for compliance with
the requirements of MIL-STD-461
in accordance with the following MIL-STD-462 methods: 
CE01, CE101, CE102, CE03
Measurement of radiated emissions from electrical equipment for compliance 
with the requirements of MIL-STD-461
in accordance with the following MIL-STD-462 methods:
RE01, RE101
RE02 (from 14 kHz to 1 GHz)
RE102 (from 10 kHz to 1 GHz)

Immunity

ESD - IEC 801-2, AS/NZS 61000.4.2, IEC 61000-4-2, EN 61000-4-2
Radiated interference - IEC 801-3 (in the range 26 MHz to 1 GHz), AS/NZS 61000-4-3, 
IEC 1000-4-3, EN 1000-4-3 over the frequency range 80 MHz to 1 GHz
Fast transients - IEC 801-4, IEC 61000-4-4, EN 61000-4-4
Surges - AS/NZS 61000-4-5, IEC 61000-4-5, EN 61000-4-5
RF conducted disturbances - AS/NZS 61000-4-6, IEC 61000-4-6, EN 61000-4-6
Power frequency magnetic fields - AS/NZS 61000.4.8, IEC 61000-4-8 and EN 61000-4-8
Voltage dips, short interruptions and voltage variations - IEC 61000-4-11, EN 61000-4-11
CISPR 14-2, EN 55014-2
CISPR 24, AS/NZS CISPR 24 and EN 55024
Immunity tests in accordance with NSC publication for Pattern Approval and Initial
Verification of Electricity Meters and Associated Transformers - 1999
Immunity tests on electromedical equipment to AS/NZS 3200.1.2, IEC 60601-1-2 and 
EN 60601-1-2
 
Performance of conducted susceptibility tests on electrical equipment for compliance with 
the requirements of MIL-STD-461 in accordance with the following MIL-STD-462 methods:
CS01, CS101, 
CS02 (except broadband susceptibility to Notice 3), 
CS114 (curves 1 to 4 only)
CS06,
CS115
Performance of radiated susceptibility tests on electrical equipment for compliance with 
the requirements of MIL-STD-461 in accordance with the following MIL-STD-462 methods:
RS01, RS101
RS02
RS03, and RS103 (up to 20 V/m from 1 to 18 GHz and 20-50 V/m from 10 kHz to 1 GHz)
RF and microwave radiation hazard measurement 
Measurement of electromagnetic fields in accordance with AS 2772.2
and EMC Technologies TP2772 Revision 2.x for compliance with ARPANSA
Radiation Protection Standard (RPS No.3) and AS/NZS 2772.1 (Int):1998
Broadband measurements of E-fields in the range 9 kHz to 45.5 GHz
Broadband measurements of H-fields in the range 9 kHz to 1 GHz
Narrowband measurements of E-fields in the range 9 kHz to 40 GHz
with least uncertainties of measurement of - 3 dB
Approval tests on telecommunications equipment 
Tests for compliance with requirements of the following standards:
AS/NZS 60950:2000 excluding clauses 4.2.8, , 4.3.13, & Annex A (other than A2 & A10).
AS/NZS 60950.1:2003, IEC 60950-1:2001, EN 60950-1:2001, excluding clauses 4.2.8, 4.3.13, Annex A1 & A3.
Approval tests on electrical appliances and accessories
Test and examinations for compliance to the following standards and, unless otherwise stated, the IEC standards on which the AS/NZS standards are based and the equivalent European Norm:
AS/NZS 3100, excluding tracking test
AS/NZS 3121

AS/NZS 60335.1: 2002 & IEC 60335-1: 2001, excluding clause 32 (radiation, toxicity and similar hazards)
AS/NZS 3350.1: 2002 & IEC 60335-1: 1991, excluding clause 32 (radiation, toxicity and similar hazards) clause 30.3 (tracking test)

AS/NZS 3350.2.2, excluding tests on current carrying hoses
AS/NZS 3350.2.3
AS/NZS 3350.2.8
AS/NZS 3350.2.12, excluding glass or similar topped devices
AS/NZS 3350.2.13
AS/NZS 3350.2.15
AS/NZS 3350.2.21, limited to maximum height of 350mm
AS/NZS 3350.2.25
AS/NZS 3350.2.26
AS/NZS 3350.2.28
AS/NZS 3350.2.29, excluding vibration test
AS/NZS 3350.2.30, limited to portable fan heaters, visible glowing radiant heating or heaters at high levels
AS/NZS 3350.2.31
AS/NZS 3350.2.32, limited to handheld equipment and massagers without heating
AS/NZS 3350.2.35
AS/NZS 3350.2.41
AS/NZS 3350.2.43
AS/NZS 3350.2.44
AS/NZS 3350.2.45
AS/NZS 3350.2.52
AS/NZS 3350.2.54, excluding tests on current carrying hose
AS/NZS 3350.2.55
AS/NZS 3350.2.56
AS/NZS 3350.2.60
AS/NZS 3350.2.73
AS/NZS 3350.2.74
AS/NZS 3350.2.75
AS/NZS 3350.2.80
AS/NZS 3350.2.85
AS/NZS 3350.2.97, excluding salt mist test
AS/NZS 3350.2.98

AS/NZS 60335.2.2
AS/NZS 60335.2.3
AS/NZS 60335.2.9, excluding induction cook tops
AS/NZS 60335.2.15
AS/NZS 60335.2.21, limited to maximum height of 350mm
AS/NZS 60335.2.25
AS/NZS 60335.2.71, excluding salt mist test
AS/NZS 60335.2.79
AS/NZS 60335.2.90
AS/NZS 60335.2.100

AS 61010.1, IEC 61010-1 & EN 61010-1 excluding clause 12 (other than 12.4 up to 45 GHz) and.13.2.3 (implosion of CRT tubes)
AS 60529 & IEC 60529 excluding IP 5X and IP 6X to clauses 13.4, 13.5 and 13.6.
Electromedical equipment  Approval tests 
Electromagnetic compatibility emission and immunity tests to AS/NZS 3200.1.2, IEC 60601-1-2 and EN 60601-1-2, based on classes of test 3.41 and 3.42


Accreditation No: 5292 
Corporate Site No: 10854 

Refer to the NATA website for the full scope of EMC Technologies accreditations.