EMC Technologies Home Page Accredited by NATA .... Company History & Archives Seminars & Training EMR RadHaz - measurement, predictions & modelling Site Map - Table of Contents Electrical Safety EMC Technologies Home Page Electrical Safety Technical Articles & External Links Company History & Archives
The Site Management Alliance  provides an integrated EMR management solution.

 


 

Up

Brisbane Branch's NATA Accreditations:


EMC Technologies Pty. Ltd. is accredited by the National Association of Testing Authorities (NATA). Australia.   NATA has mutual recognition agreements (MRA) with over 30 similar accreditation bodies around the world including NVLAP, A2LA, UKAS, DaTech.   The MRA facilitates acceptance and recognition of NATA endorsed reports in most countries.   

A NATA endorsed reports means that you only need test once and your product can be sold in global markets.

NATA Accredited Laboratory Number: 5292

EMC Technologies Pty Ltd is NATA accredited for  a wide range of EMC, EMR, SAR and Safety standards.  

EMC Technologies Brisbane Branch  Testing accreditations include;

 

Emissions

Immunity

AS/NZS CISPR 22, CISPR 22, CNS 13438 and EN 55022 (excluding disturbances at telecommunications ports) ITE ESD - IEC 801-2, AS/NZS 61000-4-2, IEC 61000-4-2, EN 61000-4-2
 AS/NZS CISPR 11, CISPR 11 and EN 55011 (in the frequency range 9 kHz to 1 GHz) excluding Van Veen loop tests. ISM (previously AS/NZS 2064) Fast transients - IEC 801-4, IEC 61000-4-4, EN 61000-4-4
AS/NZS CISPR 14.1, CISPR 14-1 and EN 55014-1 - Appliances Surges - (1.2/50μs only) AS/NZS 61000.4.5, IEC 61000-4-5, EN 61000-4-5
AS/NZS CISPR 15, clauses 5.2.4, 5.3.2, 5.3.3 excluding devices operating at greater than 100 Hz and Van Veen loop tests. RF conducted disturbances - AS/NZS 61000.4.6, IEC 61000-4-6, EN 61000-4-6
AS/NZS 4251.1, EN 61000-6-3 (excluding measurements below 2 kHz and dc ports) Generic Power frequency magnetic fields - AS/NZS 61000.4.8, IEC 61000-4-8 and EN 61000-4-8
Voltage dips, short interruptions and voltage variations – AS/NZS 61000-4-11, IEC 61000-4-11, EN 61000-4-11

A fully compliant semi-anechoic chamber was installed in September 2005 in the Acacia Ridge labs.  NATA accreditation for testing to IEC/EN/AS/NZS 61000-4-3 is pending.


Refer to the NATA website for the full scope of EMC Technologies accreditations.

 

top of page

 


 


 

EMC Technologies Logo; Click to go to Home Page

If it's really URGENT

Call any time on: +61 418 566 466 

EMC Technologies - Victoria (Head Office)

176 Harrick Road Keilor Park Victoria 3042 Australia
Ph: +61 3 9365 1000          Fax: +61 3 9
331 7455

 

EMC Technologies -  New Zealand

47 MacKelvie Street, Grey Lynn, Auckland New Zealand         Ph: + 64 93600 862       Fax: + 64 93600 861

 

EMC Technologies - New South Wales

Unit 3, 87 Station Road, Seven Hills NSW 2147 Australia                Ph: + 612 9624 2777       Fax:  + 612 9838 4050

 

EMC Technologies - Queensland

Unit 1 / 15 Success Street, Acacia Ridge 4110 Qld Australia    Ph: + 617 3875 2455       Fax: + 617 3875 2466


www.emctech.com.au
© Copyright EMC Technologies 2007