EMC Technologies Home Page Accredited by NATA .... Company History & Archives Seminars & Training EMR RadHaz - measurement, predictions & modelling Site Map - Table of Contents Electrical Safety EMC Technologies Home Page Electrical Safety Technical Articles & External Links Company History & Archives
The Site Management Alliance  provides an integrated EMR management solution.

 


 

Up

Laboratory & OATS Facilities

 

Laboratory Facilities

EMC Technologies Brisbane - State of the art test facilites

EMC Technologies provides NATA accredited Electromagnetic Compatibility (EMC) testing right here in Brisbane.  We are located just 15kms south of the CBD in the suburb of Acacia Ridge.  

An Open Area Test Site (OATS) complements the lab, and is located between Ipswich and Boonah, just 50 minutes drive from the laboratory.  

We can offer C-tick, CE , FCC and most other EMC tests at the facility.  

NATA accredited immunity testing is also provided. 

  • 6m x 6m x 2.4m Screened Room
  • 7.2m x 4.2m x 4m Anechoic chamber
  • EN61000-4-2 Electrostatic Discharge (ESD) tests to 15kV (Air) and 8kV (Contact)
  • EN61000-4-3 Radiated Immunity 30 MHz to 2500 MHz
  • EN61000-4-4 Electrical Fast Transient Bursts (EFT) tests to 2.2kV
  • EN61000-4-5 (Surge) tests to 2.2kV
  • EN61000-4-6 (Conducted Immunity) tests
  • EN61000-4-8 (Magnetic Field Immunity) tests
  • EN61000-4-11 (Voltage Dips and Interruptions Immunity) tests
  • Two LISNs for Conducted Emissions tests
  • Absorbing clamp (Interference Power)
  • Fully compliant CISPR 16 receiver and systems
  • Automated testing for enhanced accuracy and fast throughput
  • EMR/EME/EMF  measurements and modelling/prediction services
  • Preliminary MIL-STD 461/2 testing


Major Upgrade

We have recently commissioned a semi-anechoic chamber for fully compliant radiated immunity testing to EN61000-4-3 over the range 80 MHz to 1000MHz.   NATA accreditation is pending.   The chamber can performance is up to 18 GHz and can also be used for MIL-STD 461/2 tests, Automotive tests and accurate pre-compliance Open Area Test Site measurements.

We have recently commissioned test  equipment to perform EN61000-3-2/3 (harmonics and flicker) for the CE requirements.  

The recent upgrade means that the all CE marking tests are carried out in Brisbane without the need to travel to Melbourne or Sydney for any of the common CE marking tests.  

top of page


Open Area Test Site (OATS)  Facilities

The Open Area Test Site is located on the Ipswich-Boonah Road, just outside Peak Crossing in the village of Milbong. The site offers the following facilities:-

EMC Technologies Brisbane Open Area Test Site OATS
  • FCC Part 15 / CISPR 16 compliant
    •     3m test distance
    •     10m test distance
  • 400kg Turntable
  • 4m antenna mast
  • State of the art EMI receiver, fully automated testing to 6.5 GHz. Testing to 40 GHz with prior arrangements.

  • Mains power, air-conditioned laboratory, telephone
  • Tea, Coffee facilities, microwave oven,
  • Creature comforts
  • Transport to OATS can be arranged

 

top of page


 

EMC Technologies Logo; Click to go to Home Page

If it's really URGENT

Call any time on: +61 418 566 466 

EMC Technologies - Victoria (Head Office)

176 Harrick Road Keilor Park Victoria 3042 Australia
Ph: +61 3 9365 1000          Fax: +61 3 9
331 7455

 

EMC Technologies -  New Zealand

47 MacKelvie Street, Grey Lynn, Auckland New Zealand         Ph: + 64 93600 862       Fax: + 64 93600 861

 

EMC Technologies - New South Wales

Unit 3, 87 Station Road, Seven Hills NSW 2147 Australia                Ph: + 612 9624 2777       Fax:  + 612 9838 4050

 

EMC Technologies - Queensland

Unit 1 / 15 Success Street, Acacia Ridge 4110 Qld Australia    Ph: + 617 3875 2455       Fax: + 617 3875 2466


www.emctech.com.au
© Copyright EMC Technologies 2007