Global Product Certification since 1992

Facilities

Melbourne Branch

 

EMC-Technologies-Melbourne

The Melbourne branch is located at Keilor Park, close to Melbourne Airport and a short freeway trip to the Melbourne CBD. Keilor Park is the head office for the EMC Technologies group and boasts the most comprehensive EMC facilities in Australia. We have thirteen dedicated labs inside our large purpose built facility of 3500 square metres. They range from  calibration test chambers to the massive 10 metre indoor Open Area Test Site (iOATS). The majority of tests can be performed in parallel in these dedicated facilities resulting in a very efficient testing process.

Customer amenities are second to none and include off-street parking, large lunch room, customer meeting rooms, internet access, customer office and lab work areas. Each laboratory work area is independently air conditioned. The security of your product and your IP are  protected by our defence accredited facilities and are extremely secure, with swipe card access to each area of the facility. We can provide class A security storage and key personnel have clearance to NV1 level.


 Indoor Open Area Test Site (iOATS) – Melbourne

iOATS

10m iOATS Chamber

 

  •  The only 10 metre indoor facility in Australia/New Zealand.
  • Compliant with all CISPR commercial EMC standards such as CISPR 11, CISPR 12, CISPR 13, CISPR 14-1, CISPR 15, CISPR 16, CISPR 22, CISPR 32.
  • NATA accredited to CISPR 11, CISPR 12, CISPR 13, CISPR 14.1, CISPR 15, CISPR 22, FCC Part 15.
  • Compliant with CISPR 25 for automotive EMC testing (vehicles and sub-assemblies).
  • Compliant with FCC Part 15 and ANSI C63.5.
  • Registered with the FCC (USA),  Industry Canada, VCCI (Japan), iDT (Singapore), BSMI (Taiwan)
  • Conveniently located in Keilor Park, close to Melbourne airport.
  • Zero RF ambient signals which typically interfere with outdoor measurements.
  • Indoors hence immune to inclement weather, spiders and snakes. (not a typo)
  • Large and comfortable, air conditioned control room.
  • Large motorised entry door (4m X 4m) for vehicles,  large EUT installation and extraction.
  • Filtered mains power (single and three phase 50Hz 32A per phase, 115VAC 60Hz)
  • Underfloor pit for housing support and ancillary equipment

 


 

CISPR 25 semi anechoic test chamber -Melbourne

CISPR 25 chamber

CISPR 25 chamber

 

  • Recognised and accredited by Ford to EMC-CS-2009
  • NATA accredited
  • Suitable for automotive EMC testing (Electronic Sub-Assemblies)
  • Large and comfortable, air conditioned control room

 


 

Sydney Branch

 

EMC-Tech-Sydney

The Sydney branch is located at Seven Hills in the Western Suburbs of Sydney, close to the North Ryde area. Accredited safety testing is available plus most of the services offered by the Melbourne laboratory.

A 30/10/3 metre Open Area Test Site (OATS) is located in the Colo area just one hour from the Seven Hills laboratory. Australian manufacturers of industrial, scientific and medical (ISM) equipment and ITE can now have testing performed to CISPR 11/EN 55011/AS/NZS CISPR 11 which requires a 30 or 10 metre test site in Sydney without the high cost of overseas testing.

 

 

The Seven Hills laboratory also has a 3 metre indoor Open Area Test Site (iOATS) allowing convenient, weather proof ambient free testing where 3 metre tests are permitted. A comprehensive NATA accredited Safety Testing laboratory is also located at Seven Hills.

 

Indoor Open Area Test Site (iOATS) – Sydney

 

Sydney-iOATS

Sydney’s indoor Open Area Test Site

 

  • 3 metre indoor facility
  • Compliant with all CISPR commercial EMC standards for 3m measurements such as CISPR 11, CISPR 12, CISPR 13, CISPR 14-1, CISPR 15, CISPR 16, CISPR 22, CISPR 32
  • NATA accredited to CISPR 11, CISPR 12, CISPR 13, CISPR 14.1, CISPR 15, CISPR 22, FCC Part 15
  • Compliant with CISPR 25 for automotive EMC testing (sub-assemblies)
  • Compliant with FCC Part 15 and ANSI C63.5
  • Registered with the FCC (USA),  Industry Canada, VCCI (Japan), iDT (Singapore), BSMI (Taiwan)
  • Zero external RF ambient signals which typically interfere with outdoor measurements
  • Indoors hence immune to inclement weather, snakes and spiders
  • Extremely efficient testing services can be provided hence very fast turnaround time
  • Large entry door for large EUT installation and extraction
  • Filtered mains power (single and three phase 50Hz 32A per phase, 115VAC 60Hz)

 New Zealand Branch

EMC-Tech-NZ

The New Zealand branch is located in Grey Lynn, Auckland and is a global product compliance agency providing IANZ-accredited services in Wireless and electromagnetic compatibility (EMC) testing and approval services. It is the only commercial accredited Wireless test lab in Australia/NZ. It’s also the only CCC (China) recognised test lab outside of China.

The facility is equipped to carry out a wide range of tests and measurements including product testing, wireless approvals, global product compliance, advisory and consultancy services, prototype evaluations, hiring facilities for development work, electromagnetic compatibility (EMC) testing, radio site surveys, system compatibility, off-air measurements, radiation hazard measurements and radio certification.

A 10 metre Open Area Test Site (OATS) is located at Orere Point which is a one hour drive south of Auckland.

NZ-OATS

NZ-OATS