EMC Technologies Home Page Accredited by NATA .... Company History & Archives Seminars & Training EMR RadHaz - measurement, predictions & modelling Site Map - Table of Contents Electrical Safety EMC Technologies Home Page Electrical Safety Technical Articles & External Links Company History & Archives
The Site Management Alliance  provides an integrated EMR management solution.

 


 

Up

Laboratory & OATS Facilities

 

Laboratory Facilities

 

  • 6m x 6m x 2.4m Screened Room
  • EN61000-4-2 Electrostatic Discharge (ESD) tests to 15kV (Air) and 8kV (Contact)
  • EN61000-4-4 Electrical Fast Transient Bursts (EFT) tests to 2.2kV
  • EN61000-4-5 (Surge) tests to 2.2kV
  • EN61000-4-6 (Conducted Immunity) tests
  • EN61000-4-11 (Voltage Dips and Interruptions Immunity) tests
  • Two LISNs for Conducted Emissions tests
  • Absorbing clamp (Interference Power)
  • Fully compliant CISPR 16 receiver and systems
  • Automated testing for enhanced accuracy and fast throughput

 

Radio Frequency & Audio Frequency

In the areas of radio frequency and audio frequency we offer:

  • Full RF measurement capability from 150 kHz to 1.3 GHz, including: 
    • frequency to ( 5 X 10 –11 (Rubidium Beam))
    • RF power to 1 kW
    • Adjacent channel power
    • Spectrum analysis to 100 Hz to 26 GHz
    • SINAD or signal/noise ratios
    • Adjacent channel selectivity
    • Intermodulation (2 and 3-signal)
    • Blocking
    • Noise floor
    • Cross modulation
    • Co-channel rejection
    •  Transient performance
  • Measurement capability to 22 GHz for many of the above parameters
  • AM + FM  modulation measurement capability
  • Climatic testing from –30C to +70C

 

At this time EN61000-4-3 (full compliance radiated immunity) for the CE requirements are not offered, however the project can be handled from the Auckland laboratory and the equipment sent to either EMCT's Sydney or Melbourne NATA accredited facilities.

Equipment is calibrated annually to internationally traceable standards.

 

 

top of page


Open Area Test Site (OATS)  Facilities

The Open Area Test Site is located on the coast Road to Thames, at  Orere Point. The site offers the following facilities:-

The OATS test lab has mains power and telephone. A microwave oven and coffee and tea facilities are provided.

Access for big trucks transporting large equipment is via sealed roads.

 

  • FCC Part 15 / CISPR 16 compliant
    • 3m test distance
    • 10m test distance
  • 400kg Turntable
  • 4m antenna mast
  • State of the art EMI receiver, fully automated testing to 6.5 GHz

  • Mains power, air-conditioned laboratory, telephone
  • Tea, Coffee facilities, microwave oven, creature comforts
  • Transport to OATS can be arranged

top of page


 

EMC Technologies Logo; Click to go to Home Page

If it's really URGENT

Call any time on: +61 418 566 466 

EMC Technologies - Victoria (Head Office)

176 Harrick Road Keilor Park Victoria 3042 Australia
Ph: +61 3 9365 1000          Fax: +61 3 9
331 7455

 

EMC Technologies -  New Zealand

47 MacKelvie Street, Grey Lynn, Auckland New Zealand         Ph: + 64 93600 862       Fax: + 64 93600 861

 

EMC Technologies - New South Wales

Unit 3, 87 Station Road, Seven Hills NSW 2147 Australia                Ph: + 612 9624 2777       Fax:  + 612 9838 4050

 

EMC Technologies - Queensland

Unit 1 / 15 Success Street, Acacia Ridge 4110 Qld Australia    Ph: + 617 3875 2455       Fax: + 617 3875 2466


www.emctech.com.au
© Copyright EMC Technologies 2007