|
|
||||||||||||||
| |||||||||||||||
|
|
EMC Technologies Testing Services
The most comprehensiveEMI/EMC/SAR/EMF/Safety facilities and expertise
in Australia or New Zealand
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Accreditation | Standard | Typical Products, Other Details |
| FCC 15 & 18 | USA certification of products onshore. The only DoC test house in Australia/NZ | Radio transmitters, most electrical products |
NATA |
FCC PART 15 DOC Procedures.
ANSI C63.4 |
Computers and peripherals, low power transmitters |
| ACMA/NATA |
ACMA testing to TS001 and SAR standards, | Telecoms and radio transmitter products |
| NATA |
AS/NZS CISPR11/EN 55011 | Industrial, Scientific and Medical |
| NATA |
AS/NZS CISPR13/EN 55013 | TV, audio, VCR's, CD players etc. |
| NATA |
AS/NZS CISPR14/EN 55014-1 | Household appliances etc |
| NATA |
AS/NZS CISPR15/EN 55015 | Lighting |
| NATA |
AS/NZS CISPR22/EN 55022 | ITE |
| NATA |
AS/NZS/IEC/EN 61000-6-3 | Generic Emissions,
Light Industry |
| NATA |
AS/NZS/IEC/EN 61000-6-4 | Generic Emissions,
Heavy Industry |
| NATA |
AS/NZS IEC/EN 61000-4-2 | ESD Immunity |
| NATA |
AS/NZS IEC/EN 61000-4-3 | Radiated Fields: Immunity to 2.5 GHz |
| NATA |
AS/NZS/IEC/EN 61000-4-4 | Electrical Fast Transients: Immunity |
| NATA |
AS/NZS IEC/EN61000-4-5 | HV Surge: Immunity |
| NATA |
AS/NZS IEC/EN 61000-4-6 | Conducted RF: Immunity |
| NATA |
AS/NZS IEC/EN 61000-4-8 | Immunity to Magnetic Fields |
| NATA |
AS/NZS IEC/EN 61000-4-11 | Voltage Dips & Interruptions |
| NATA imminent | IEC 61000-4-13 | immunity to Inter-harmonics |
| NATA |
IEC/EN 61000-6-1
|
Generic Immunity,
Light Industry |
| NATA |
IEC/EN 61000-6-2 | Generic Immunity,
Heavy Industry |
| NATA |
EN 55103 | Theatre Lighting, Control |
| NATA |
EN 55014-2 | Theatre Lighting & Controls |
| NATA |
EN 60601-1-2/IEC 601-1-2 | Medical Devices, TGA Rules |
| NATA |
EN 61326-1 | Industrial, scientific measurement instruments. |
| NATA |
MIL-STD 461 B,C,D,E and MIL-STD 462 | Required for Military contracts |
| NATA |
MIL-STD 285 | Shielded Rooms, Chambers etc |
| NATA
ACMA |
Competent Body | NATA approved, government appointed, TCF assessments and Certificates issued. |
| NATA |
AS/NZS CISPR12 | EC Automotive Directive |
| NATA |
ARPANSA (formelry AS/NZS2772.1:1998 (interim) Methods AS2772.2:
|
Measurement of Radio Frequency Radiation: Maximum Exposure Levels, 3 kHz to 300GHz. Including SAR testing |
| NATA |
SAR to EN50360, EN50361, IEEE1528, IEC 62209-1, FCC OET65C, ACMA etc | SAR testing from 150 MHz to 6 GHz. Non-NATA down to 35 MHz. |
| NZ | Ministry of Economic Development | Most electrical products including transmitters |
| EUROPE |
Testing accepted by European CB's for CE Marking. Designated CAB | details on request |
| JAPAN | VCCI registered for on shore VCCI approvals. | R-460 C-472 |
| TAIWAN | BSMI and DGT recognised |
The only lab in Australia/NZ |
| TUV Product Service | International EMC Mark, valid for all products. |  |
| Safety and LVD | Electrical safety testing to CE, Australia/NZ | Most product types including appliances, ITE and ISM Includes IP55 testing |
| Automotive Electronics | AS/NZS CISPR25 Vehicle-On board electronics and corporate standards | Testing to Ford, GM, Toyota, Mitsubishi standards |
NATA accreditation, as indicated above, for
all the major
European Emission and Immunity standards.
Testing is NATA accredited and is accepted for CB (Competent Body) certificates
In house tests providing complete EMI/EMC certification
for all these standards:
| CISPR/EN | All CISPR/EN standards |
| EN 61000-3 & 4 | Generic Emission standards |
| EN 61000-1 & 2 | Generic Immunity standards |
| IEC/EN61000-4-2 | ESD |
| IEC/EN61000-4-3 | Radiated Susceptibility to > 100 V/m |
| IEC/EN61000-4-4 | Electrical Fast Transients |
| IEC/EN61000-4-5 | Surge Immunity |
| IEC/EN61000-4-6 | Immunity to conducted RF |
| IEC/EN61000-4-8 | Immunity to Magnetic Fields |
| IEC/EN61000-4-9 | |
| IEC/EN61000-4-10 | |
| IEC/EN61000-4-11 | Voltage Interruptions |
| IEC/EN61000-4-12 | |
| IEC61000-4-13 | Inter-harmonics |
| IEC/EN61000-3-2 | Harmonics Emissions |
| IEC/EN61000-3-3 | Voltage Flicker/Fluctuations |
| EN50360/1 and IEC62209-1 | SAR testing for R&TTE to 6GHz |
| EN50366 & EN50371 | EMF testing for LVD and R&TTE |
| IEC 601-1-2 | Medical EMC / EN60601-1-2 |
EMC Technologies has performed project management roles on behalf of many companies supplying major systems to the commercial, defence
and Aeropsapce sectors. Examples include:
overseas Public Transport Authorities (eg. assessing interference threats to proposed EMG or EEG installations) |
 |
Both the Melbourne and Sydney facilities have been appointed by the Australian Government regulator the Australian Communications and Media Authority (ACMA) as a Competent Body under the EMC Framework, Radiocommunications Act 1992.
This allows EMC Technologies to provide suppliers and manufacturers of electrical and electronic products with the alternate route to establishing compliance by means of the assessment of Technical Construction Files (TCF).
Examples of the use of the TCF route include the following:
EMC Technologies is an accredited Competent Body for Australia and a designated Conformity Assessment Body (CAB0 for European CE Marking compliance. The key personnel are also NATA signatories for most of the ACMA EMC standards and are well placed to offer independent advice to manufacturers and suppliers on the selection of the best route to compliance with the EMC regulations. This makes EMC Technologies the only Competent Body to date to also provide NATA accredited testing for the relevant emission and immunity standards.
For a comprehensive discussion of the role of Competent Bodies, have a look at THE ROLE OF AN EMC TEST HOUSE AND COMPETENT BODY article by EMC Technologies Technical Director Chris Zombolas.
| Perform EMC consultation testing and complete approval
services for medical equipment manufacturers for obtaining FDA approval.
Our compliance testing is accepted by the FDA for selected products. |
 |
Only an independent third party NATA test will guarantee
delivery of the promised shielding performance. EMC Technologies provides
a comprehensive shielding design and evaluation service.
 |
Testing to all military/aerospace standards.
Extensive RS03/RS103 capability.
14 kHz to 1GHz at > 100 V/m, 1-18 GHz at >200 V/m. Automated testing for fast turnaround and enhanced accuracy. Preparation of EMC test plans. Review of tender documents. Design consultation engineers with over 20 years experience in the defence industries. CS114, 115 and 116 capability. TEMPEST testing and consultation
|
 |
All Australian/NZ EMI/EMC/RFI/SAR standards for C-tick/A-tick marking as per Australian Communication and Media Authority (ACMA) regulations. |
|
| EMC Technologies is
the most accredited EMC test house in Australia and can provide |
 |
AN
UNTRACEABLE MEASUREMENT IS NOT WORTH THE RISK ONLY USE NATA TESTING |
| NATA endorsed reports for all electrical/electronic products. | ||
| Comprehensive Spectrum
Monitoring
|
| We've developed a comprehensive
spectrum logging capability
which provides for continuous 24 hour recording. This allows for the capture of random events and the generation of a diurnal profile accurately reflecting the daily variation in electromagnetic fields. Site characterisations are therefore more comprehensive than those permitted by slice-of-time spectral recordings. You can accurately determine the period of operation
of
|
Save time and money by using our NATA registered
site for precompliance testing.
Facilities include:
|
 |
Use our "state of the art" HP8593EM precompliance
measurement system or use your own equipment. Measurements can be performed
to 40 GHz.
| EMC Technologies staff have developed EMI/EMC test
software in use throughout Australia and overseas.
We can provide pre-packaged or custom software tailored to your requirements for use at your facility or ours. Automated testing is performed to emission and immunity standards for CISPR, FCC and MIL-STD461/2 . |
NATA Accredited electrical safety testing to:
AS/NZS/IEC/EN 60950
AS/NZS IEC/EN61010
AS/NZS/IEC/EN 60335-1 Amdt 1 2004. Includes EMC functional safety clauses
EMF standards include EN50366, EN50371
Harmonic analysis and voltage flicker/fluctuation
testing to
EN61000-3-2 and EN61000-3-3
EMC Technologies can provide National Measurements Insttiute (NMI) traceable calibrations to most EMC test instruments and transducers in accordance with CISPR and MIL-STD-461/462 requirements. Special EMC calibration requirements can also be met.
Antennas:
EFT/B - HV Surge:
Misc RF:
EMC studies are carried out using specially developed sophisticated measurement systems. On-site investigations identify interference problems and independent cost effective solutions are provided.
Our consultants are among the most experienced in the world with a solid track record in EMC/EMI diagnosis and solution development.
If your product fails the test then you need the services of a laboratory with many years of specialised EMC/EMI experience. EMC Technologies staff can draw on the experience gained from thousands of tests and fixes to provide the most appropriate and cost effective solution.
We have hundreds of EMI components available in-house from a large number of suppliers.
EMC problem solving can be expensive. Our recommendations can reference products from a large list of vendors providing you with
greater sourcing flexibility and a cost effective solution.
We will provide comprehensive plots of the measurements with an analysis of the results and recommendations to achieve compliance.
Radiated emissions plot of a clients device
before and after modification.
READ MORE about the comprehensive presentation of test data available from our colour plots of your test results.
|
www.emctech.com.au |
