Global Product Compliance and Certification Since 1992
EMC Technologies Blog
Compliance News & Capability updates
Latest Articles
USING FCC “APPROVED” WIRELESS MODULES TO REDUCE TESTING AND CERTIFICATION COSTS
Using “preapproved“ wireless/radio transmitter modules does not eliminate testing but it can eliminate the need for certification and reduce the amount of testing required. Judicious selection of a preapproved module can give you the following benefits: Reduced...
Ingress Protection rated enclosures testing
What IP rating is needed! The first aspect of deciding upon what enclosure and what testing may be required is to determine the Ingress Protection rating required. This can be either defined by regulatory compliance requirements or through the intended environment...
Radio Equipment Directive (RED) and Low Voltage Directive (LVD)
Nowadays, almost every type of equipment has got a radio device built in. From small handsets, household appliances (cooking ovens etc) to big machines. As per RED, the whole product needs to show compliance to the relevant Electrical Safety standard (also no...
EMC Technologies Expansion & Improvements!
In an endeavour to keep our vested shareholders and clients updated with company growth, we will periodically publish changes and developments happening within the company. Here is a recap of recent news: EMC Tech is in constant expansion mode. We headhunted talent in...
EMC Technologies Group now FCC (USA) & ISED (Canada) Accredited at all 4 labs
The entire EMC Technologies group of Test labs are now all accredited for the testing of intentional RF transmitters that require certification. Each of the four labs has been formally designated as a Conformity Assessment Body (CAB) for the testing required for the...
NATA Accredited IEC/EN 61000-4-18 testing
EMC Technologies, Australia’s leading test house, is pleased to advise another Australian first that they can provide NATA accredited testing to the IEC 61000-4-18 or EN 61000-4-18. IEC 61000-4-18: Electromagnetic compatibility (EMC) – Part 4-18: Testing and...
Keith Armstrong – Electromagnetic (EM) design techniques 2019
Keith's electromagnetic (EM) design techniques have been well-proven for 25 years to achieve excellent and cost-effective signal integrity (SI), power integrity (PI) and electromagnetic compatibility (EMC), even on the first prototype, see...
High Power Flicker-Harmonic & Power Quality Compliance Test Capability at EMC Technologies
The European Union (EU) requires electrical products to comply with a series of CE marking EMC standards relating to power quality. These include harmonics, flicker and inter-harmonics immunity standard. Harmonised standards are used to declare compliance...
FCC SDoC – Violette Engineering
The FCC released Public Notice DA 19-91 informing retailers about the Supplier’s Declaration of Conformity requirements. Violette Engineering Corporation provides SDoC Services for importers. More here An extract from the notice is below. ATTENTION...