Test Equipment Calibration

EMC & RF test equipment calibration

EMC & RF Test Equipment calibration


Specialising in Harmonics and Flicker test system calibration, ESD  generator calibration, LISN and TLISN calibration, EMR probe calibration, antenna calibration and transient generator calibration

EMC Technologies can provide convenient, local, NATA accredited calibration services which greatly reduces lead time and costs for EMC test equipment. In the past these items had to be sent overseas or to expensive government laboratories. We can calibrate these items against common standards such as CISPR 16 (and subparts), IEC 61000-6-X series, ANSI C63.4, ANSI C63.5 and ARP 958.

We can calibrate the following items and provide NATA endorsed calibration reports:

  • Harmonics and Flicker test system calibration (IEC TR 61000-4-37, IEC TR 61000-4-38)
  • ESD generator calibration (including IEC 61000-4-2, ISO 10605)
  • E field and EMR probe calibration for IEC 61000-4-3 (1 V/m, 3 V/m, 10 V/m up to 120 V/m)
  • EFT Generator calibration (IEC 61000-4-4)
  • High Voltage Surge Generator calibration (IEC 61000-4-5)
  • Transient Generator calibration (IEC 61000-4-4 and IEC 61000-4-5)
  • CDN calibration for IEC 61000-4-6 (1 Vrms, 3 Vrms, 10 Vrms)
  • ISN calibration (CISPR 16 series, ANSI C63.4)
  • LISN calibration (CISPR 16 series, ANSI C63.4)
  • TLISN calibration (CISPR 16 series, ANSI C63.4)
  • CDN calibration (CISPR 16 series, ANSI C63.4)
  • EMR Field Probe calibration (to 18GHz and up to 120V/m)
  • EMC Antenna calibration (rods/monopoles, biconicals, log periodics, horns) per CISPR 16 series, ANSI C63.5, ARP 958

Equipment Calibrated at EMC Technologies

We have a comprehensive array of measurement equipment and can offer traceable non-accredited verification services for a variety of devices such as:

  • Spectrum Analysers
  • RF Signal Generators
  • RF Power Meters and Sensors
  • CISPR Detectors
  • Voltage Dips and Interruptions generators for IEC 61000-4-11
  • Attenuators – DC to 40 GHz (Insertion Loss only)
  • Cables – DC to 40 GHz (Insertion Loss only)
  • Current Probes – 9 kHz to 400 MHz
  • Harmonics and Interharmonics Immunity per IEC 61000-4-13 NATA accreditation pending!

 

 

Not found the EMC Test equipment calibration service you need?

If your device is not on the list please contact us, there is a chance we could offer some type of verification service.

But we do more than just calibrate test equipment!

Antenna Performance

Antenna performance characterization services are available such as measurement of Antenna gain, Antenna factor, VSWR or Return loss measurements, Polar plots and Power output. These RF parameters can be measured in our highly accurate anechoic chambers (iOATS facilities).

GET A QUOTE